PCRE BUILD-TIME OPTIONS

       This  document  describes  the  optional  features  of PCRE that can be
       selected when the library is compiled. They are all selected, or  dese-
       lected, by providing options to the configure script that is run before
       the make command. The complete list of  options  for  configure  (which
       includes  the  standard  ones such as the selection of the installation
       directory) can be obtained by running

         ./configure --help

       The following sections describe certain options whose names begin  with
       --enable  or  --disable. These settings specify changes to the defaults
       for the configure command. Because of the  way  that  configure  works,
       --enable  and  --disable  always  come  in  pairs, so the complementary
       option always exists as well, but as it specifies the  default,  it  is
       not described.

C++ SUPPORT

       By default, the configure script will search for a C++ compiler and C++
       header files. If it finds them, it automatically builds the C++ wrapper
       library for PCRE. You can disable this by adding

         --disable-cpp

       to the configure command.

UTF-8 SUPPORT

       To build PCRE with support for UTF-8 character strings, add

         --enable-utf8

       to  the  configure  command.  Of  itself, this does not make PCRE treat
       strings as UTF-8. As well as compiling PCRE with this option, you  also
       have  have to set the PCRE_UTF8 option when you call the pcre_compile()
       function.

UNICODE CHARACTER PROPERTY SUPPORT

       UTF-8 support allows PCRE to process character values greater than  255
       in  the  strings that it handles. On its own, however, it does not pro-
       vide any facilities for accessing the properties of such characters. If
       you  want  to  be able to use the pattern escapes \P, \p, and \X, which
       refer to Unicode character properties, you must add

         --enable-unicode-properties

       to the configure command. This implies UTF-8 support, even if you  have
       not explicitly requested it.

       to  the  configure  command.  There  is  also  a --enable-newline-is-lf
       option, which explicitly specifies linefeed as the newline character.

       Alternatively, you can specify that line endings are to be indicated by
       the two character sequence CRLF. If you want this, add

         --enable-newline-is-crlf

       to  the  configure command. Whatever line ending convention is selected
       when PCRE is built can be overridden when  the  library  functions  are
       called.  At  build time it is conventional to use the standard for your
       operating system.

BUILDING SHARED AND STATIC LIBRARIES

       The PCRE building process uses libtool to build both shared and  static
       Unix  libraries by default. You can suppress one of these by adding one
       of

         --disable-shared
         --disable-static

       to the configure command, as required.

POSIX MALLOC USAGE

       When PCRE is called through the POSIX interface (see the pcreposix doc-
       umentation),  additional  working  storage  is required for holding the
       pointers to capturing substrings, because PCRE requires three  integers
       per  substring,  whereas  the POSIX interface provides only two. If the
       number of expected substrings is small, the wrapper function uses space
       on the stack, because this is faster than using malloc() for each call.
       The default threshold above which the stack is no longer used is 10; it
       can be changed by adding a setting such as

         --with-posix-malloc-threshold=20

       to the configure command.

HANDLING VERY LARGE PATTERNS

       Within  a  compiled  pattern,  offset values are used to point from one
       part to another (for example, from an opening parenthesis to an  alter-
       nation  metacharacter).  By default, two-byte values are used for these
       offsets, leading to a maximum size for a  compiled  pattern  of  around
       64K.  This  is sufficient to handle all but the most gigantic patterns.
       Nevertheless, some people do want to process enormous patterns,  so  it
       is  possible  to compile PCRE to use three-byte or four-byte offsets by
       adding a setting such as

         --with-link-size=3

       verely limit PCRE's operation. (The Unix environment does  not  usually
       suffer from this problem, but it may sometimes be necessary to increase
       the maximum stack size.  There is a discussion in the  pcrestack  docu-
       mentation.)  An alternative approach to recursion that uses memory from
       the heap to remember data, instead of using recursive  function  calls,
       has  been  implemented to work round the problem of limited stack size.
       If you want to build a version of PCRE that works this way, add

         --disable-stack-for-recursion

       to the configure command. With this configuration, PCRE  will  use  the
       pcre_stack_malloc  and pcre_stack_free variables to call memory manage-
       ment functions. Separate functions are provided because  the  usage  is
       very  predictable:  the  block sizes requested are always the same, and
       the blocks are always freed in reverse order. A calling  program  might
       be  able  to implement optimized functions that perform better than the
       standard malloc() and  free()  functions.  PCRE  runs  noticeably  more
       slowly when built in this way. This option affects only the pcre_exec()
       function; it is not relevant for the the pcre_dfa_exec() function.

LIMITING PCRE RESOURCE USAGE

       Internally, PCRE has a function called match(), which it calls  repeat-
       edly   (sometimes   recursively)  when  matching  a  pattern  with  the
       pcre_exec() function. By controlling the maximum number of  times  this
       function  may be called during a single matching operation, a limit can
       be placed on the resources used by a single call  to  pcre_exec().  The
       limit  can be changed at run time, as described in the pcreapi documen-
       tation. The default is 10 million, but this can be changed by adding  a
       setting such as

         --with-match-limit=500000

       to   the   configure  command.  This  setting  has  no  effect  on  the
       pcre_dfa_exec() matching function.

       In some environments it is desirable to limit the  depth  of  recursive
       calls of match() more strictly than the total number of calls, in order
       to restrict the maximum amount of stack (or heap,  if  --disable-stack-
       for-recursion is specified) that is used. A second limit controls this;
       it defaults to the value that  is  set  for  --with-match-limit,  which
       imposes  no  additional constraints. However, you can set a lower limit
       by adding, for example,

         --with-match-limit-recursion=10000

       to the configure command. This value can  also  be  overridden  at  run
       time.

USING EBCDIC CODE

       PCRE  assumes  by  default that it will run in an environment where the