SYNOPSIS
pic [ -nvCSU ] [ filename ... ]
pic -t [ -cvzCSU ] [ filename ... ]
DESCRIPTION
This manual page describes the GNU version of pic, which is part of the
groff document formatting system. pic compiles descriptions of pic-
tures embedded within troff or TeX input files into commands that are
understood by TeX or troff. Each picture starts with a line beginning
with .PS and ends with a line beginning with .PE. Anything outside of
.PS and .PE is passed through without change.
It is the user's responsibility to provide appropriate definitions of
the PS and PE macros. When the macro package being used does not sup-
ply such definitions (for example, old versions of -ms), appropriate
definitions can be obtained with -mpic: These will center each picture.
OPTIONS
Options that do not take arguments may be grouped behind a single -.
The special option -- can be used to mark the end of the options. A
filename of - refers to the standard input.
-C Recognize .PS and .PE even when followed by a character other
than space or newline.
-S Safer mode; do not execute sh commands. This can be useful when
operating on untrustworthy input. (enabled by default)
-U Unsafe mode; revert the default option -S.
-n Don't use the groff extensions to the troff drawing commands.
You should use this if you are using a postprocessor that
doesn't support these extensions. The extensions are described
in groff_out(5). The -n option also causes pic not to use zero-
length lines to draw dots in troff mode.
-t TeX mode.
-c Be more compatible with tpic. Implies -t. Lines beginning with
\ are not passed through transparently. Lines beginning with .
are passed through with the initial . changed to \. A line
beginning with .ps is given special treatment: it takes an
optional integer argument specifying the line thickness (pen
size) in milliinches; a missing argument restores the previous
line thickness; the default line thickness is 8 milliinches.
The line thickness thus specified takes effect only when a non-
negative line thickness has not been specified by use of the
thickness attribute or by setting the linethick variable.
-v Print the version number.
-z In TeX mode draw dots using zero-length lines.
/usr/share/doc/groff/1.19.1/pic.ms
TeX mode
TeX mode is enabled by the -t option. In TeX mode, pic will define a
vbox called \graph for each picture. Use the figname command to change
the name of the vbox. You must yourself print that vbox using, for
example, the command
\centerline{\box\graph}
Actually, since the vbox has a height of zero (it is defined with
\vtop) this will produce slightly more vertical space above the picture
than below it;
\centerline{\raise 1em\box\graph}
would avoid this.
To make the vbox having a positive height and a depth of zero (as used
e.g. by LaTeX's graphics.sty), define the following macro in your docu-
ment:
\def\gpicbox#1{%
\vbox{\unvbox\csname #1\endcsname\kern 0pt}}
Now you can simply say \gpicbox{graph} instead of \box\graph.
You must use a TeX driver that supports the tpic specials, version 2.
Lines beginning with \ are passed through transparently; a % is added
to the end of the line to avoid unwanted spaces. You can safely use
this feature to change fonts or to change the value of \baselineskip.
Anything else may well produce undesirable results; use at your own
risk. Lines beginning with a period are not given any special treat-
ment.
Commands
for variable = expr1 to expr2 [by [*]expr3] do X body X
Set variable to expr1. While the value of variable is less than
or equal to expr2, do body and increment variable by expr3; if
by is not given, increment variable by 1. If expr3 is prefixed
by * then variable will instead be multiplied by expr3. X can
be any character not occurring in body.
if expr then X if-true X [else Y if-false Y]
Evaluate expr; if it is non-zero then do if-true, otherwise do
if-false. X can be any character not occurring in if-true. Y
can be any character not occurring in if-false.
print arg...
Concatenate the arguments and print as a line on stderr. Each
Include filename at this point in the file.
copy ["filename"] thru X body X [until "word"]
copy ["filename"] thru macro [until "word"]
This construct does body once for each line of filename; the
line is split into blank-delimited words, and occurrences of $i
in body, for i between 1 and 9, are replaced by the i-th word of
the line. If filename is not given, lines are taken from the
current input up to .PE. If an until clause is specified, lines
will be read only until a line the first word of which is word;
that line will then be discarded. X can be any character not
occurring in body. For example,
.PS
copy thru % circle at ($1,$2) % until "END"
1 2
3 4
5 6
END
box
.PE
is equivalent to
.PS
circle at (1,2)
circle at (3,4)
circle at (5,6)
box
.PE
The commands to be performed for each line can also be taken
from a macro defined earlier by giving the name of the macro as
the argument to thru.
reset
reset variable1[,] variable2 ...
Reset pre-defined variables variable1, variable2 ... to their
default values. If no arguments are given, reset all pre-
defined variables to their default values. Note that assigning
a value to scale also causes all pre-defined variables that con-
trol dimensions to be reset to their default values times the
new value of scale.
plot expr ["text"]
This is a text object which is constructed by using text as a
format string for sprintf with an argument of expr. If text is
omitted a format string of "%g" is used. Attributes can be
specified in the same way as for a normal text object. Be very
careful that you specify an appropriate format string; pic does
only very limited checking of the string. This is deprecated in
favour of sprintf.
y = 5
]
print x " " y
.PE
prints 5 3.
Arguments of the form
X anything X
are also allowed to be of the form
{ anything }
In this case anything can contain balanced occurrences of { and }.
Strings may contain X or imbalanced occurrences of { and }.
Expressions
The syntax for expressions has been significantly extended:
x ^ y (exponentiation)
sin(x)
cos(x)
atan2(y, x)
log(x) (base 10)
exp(x) (base 10, ie 10^x)
sqrt(x)
int(x)
rand() (return a random number between 0 and 1)
rand(x) (return a random number between 1 and x; deprecated)
srand(x) (set the random number seed)
max(e1, e2)
min(e1, e2)
!e
e1 && e2
e1 || e2
e1 == e2
e1 != e2
e1 >= e2
e1 > e2
e1 <= e2
e1 < e2
"str1" == "str2"
"str1" != "str2"
String comparison expressions must be parenthesised in some contexts to
avoid ambiguity.
Other Changes
A bare expression, expr, is acceptable as an attribute; it is equiva-
lent to dir expr, where dir is the current direction. For example
"foo" above ljust
is legal.
There is no limit to the depth to which blocks can be examined. For
example,
[A: [B: [C: box ]]] with .A.B.C.sw at 1,2
circle at last [].A.B.C
is acceptable.
Arcs now have compass points determined by the circle of which the arc
is a part.
Circles, ellipses, and arcs can be dotted or dashed. In TeX mode
splines can be dotted or dashed also.
Boxes can have rounded corners. The rad attribute specifies the radius
of the quarter-circles at each corner. If no rad or diam attribute is
given, a radius of boxrad is used. Initially, boxrad has a value of 0.
A box with rounded corners can be dotted or dashed.
The .PS line can have a second argument specifying a maximum height for
the picture. If the width of zero is specified the width will be
ignored in computing the scaling factor for the picture. Note that GNU
pic will always scale a picture by the same amount vertically as well
as horizontally. This is different from the DWB 2.0 pic which may
scale a picture by a different amount vertically than horizontally if a
height is specified.
Each text object has an invisible box associated with it. The compass
points of a text object are determined by this box. The implicit
motion associated with the object is also determined by this box. The
dimensions of this box are taken from the width and height attributes;
if the width attribute is not supplied then the width will be taken to
be textwid; if the height attribute is not supplied then the height
will be taken to be the number of text strings associated with the
object times textht. Initially textwid and textht have a value of 0.
In (almost all) places where a quoted text string can be used, an
expression of the form
sprintf("format", arg,...)
can also be used; this will produce the arguments formatted according
to format, which should be a string as described in printf(3) appropri-
ate for the number of arguments supplied.
The thickness of the lines used to draw objects is controlled by the
linethick variable. This gives the thickness of lines in points. A
negative value means use the default thickness: in TeX output mode,
this means use a thickness of 8 milliinches; in TeX output mode with
the -c option, this means use the line thickness specified by .ps
lines; in troff output mode, this means use a thickness proportional to
ally gray shade. A value greater than 1 can also be used: this means
fill with the shade of gray that is currently being used for text and
lines. Normally this will be black, but output devices may provide a
mechanism for changing this. Without an argument, then the value of
the variable fillval will be used. Initially this has a value of 0.5.
The invisible attribute does not affect the filling of objects. Any
text associated with a filled object will be added after the object has
been filled, so that the text will not be obscured by the filling.
Three additional modifiers are available to specify colored objects:
outline[d] sets the color of the outline, shaded the fill color, and
colo[u]r[ed] sets both. All three keywords expect a suffix specifying
the color, for example
circle shaded "green" outline "black"
Currently, color support isn't available in TeX mode. Predefined color
names for groff are in the device macro files, for example ps.tmac;
additional colors can be defined with the .defcolor request (see the
manual page of troff(1) for more details).
To change the name of the vbox in TeX mode, set the pseudo-variable
figname (which is actually a specially parsed command) within a pic-
ture. Example:
.PS
figname = foobar;
...
.PE
The picture is then available in the box \foobar.
pic assumes that at the beginning of a picture both glyph and fill
color are set to the default value.
Arrow heads will be drawn as solid triangles if the variable arrowhead
is non-zero and either TeX mode is enabled or the -n option has not
been given. Initially arrowhead has a value of 1. Note that solid
arrow heads are always filled with the current outline color.
The troff output of pic is device-independent. The -T option is there-
fore redundant. All numbers are taken to be in inches; numbers are
never interpreted to be in troff machine units.
Objects can have an aligned attribute. This will only work if the
postprocessor is grops. Any text associated with an object having the
aligned attribute will be rotated about the center of the object so
that it is aligned in the direction from the start point to the end
point of the object. Note that this attribute will have no effect for
objects whose start and end points are coincident.
In places where nth is allowed `expr'th is also allowed. Note that 'th
called. For example, the mm macro package adds a page number, which is
very annoying. At the moment, calling standard groff without any macro
package works. Alternatively, you can define your own requests, e.g.
to do nothing:
.de PS
..
.de PE
..
groff itself does not provide direct conversion into other graphics
file formats. But there are lots of possibilities if you first trans-
form your picture into PostScript(R) format using the groff option
-Tps. Since this ps-file lacks BoundingBox information it is not very
useful by itself, but it may be fed into other conversion programs,
usually named ps2other or pstoother or the like. Moreover, the Post-
Script interpreter ghostscript (gs) has built-in graphics conversion
devices that are called with the option
gs -sDEVICE=<devname>
Call
gs --help
for a list of the available devices.
As the Encapsulated PostScript File Format EPS is getting more and more
important, and the conversion wasn't regarded trivial in the past you
might be interested to know that there is a conversion tool named
ps2eps which does the right job. It is much better than the tool
ps2epsi packaged with gs.
For bitmapped graphic formats, you should use pstopnm; the resulting
(intermediate) PNM file can be then converted to virtually any graphics
format using the tools of the netpbm package .
FILES
/usr/share/groff/1.19.1/tmac/pic.tmac
Example definitions of the PS and PE macros.
SEE ALSO
troff(1), groff_out(5), tex(1), gs(1), ps2eps(1), pstopnm(1),
ps2epsi(1), pnm(5)
Tpic: Pic for TeX
Brian W. Kernighan, PIC -- A Graphics Language for Typesetting (User
Manual). AT&T Bell Laboratories, Computing Science Technical Report
No. 116 <http://cm.bell-labs.com/cm/cs/cstr/116.ps.gz> (revised May,
1991).
ps2eps is available from CTAN mirrors, e.g.
tion Unix, which interprets 0 as black and 1 as white.
PostScript(R) is a registered trademark of Adobe Systems Incorporation.
Groff Version 1.19.1 9 July 2003 PIC(1)
Man(1) output converted with
man2html