SYNOPSIS
kdb5_util [-r realm] [-d dbname] [-k mkeytype] [-M mkeyname]
[-sf stashfilename] [-m] command [command_options]
DESCRIPTION
kdb5_util allows an administrator to perform low-level maintainance
procedures on the Kerberos and KADM5 database. Databases can be cre-
ated, destroyed, and dumped to and loaded from ASCII files. Addition-
ally, kdb5_util can create a Kerberos master key stash file. kdb5_util
subsumes the functionality of and makes obsolete the previous database
maintainance programs kdb5_create, kdb5_edit, kdb5_destroy, and
kdb5_stash.
When kdb5_util is run, it attempts to acquire the master key and open
the database. However, execution continues regardless of whether or
not kdb5_util successfully opens the database, because the database may
not exist yet or the stash file may be corrupt.
COMMAND-LINE OPTIONS
-r realm
specifies the Kerberos realm of the database; by default the
realm returned by krb5_default_local_realm(3) is used.
-d dbname
specifies the name under which the principal database is stored;
by default the database is that listed in kdc.conf(5). The
KADM5 policy database and lock file are also derived from this
value.
-k mkeytype
specifies the key type of the master key in the database; the
default is that given in kdc.conf.
-M mkeyname
principal name for the master key in the database; the default
is that given in kdc.conf.
-m specifies that the master database password should be read from
the TTY rather than fetched from a file on disk.
-sf stash_file
specifies the stash file of the master database password.
-P password
specifies the master database password. This option is not rec-
ommended.
COMMANDS
create [-s]
Creates a new database. If the -s option is specified, the
stash file is also created. This command fails if the database
already exists. If the command is successful, the database is
[-verbose] [-mkey_convert] [-new_mkey_file mkey_file] [-rev]
[-recurse] [filename [principals...]]
Dumps the current Kerberos and KADM5 database into an ASCII
file. By default, the database is dumped in current format,
"kdb5_util load_dumpversion 5". If filename is not specified,
or is the string "-", the dump is sent to standard output.
Options:
-old causes the dump to be in the Kerberos 5 Beta 5 and ear-
lier dump format ("kdb5_edit load_dump version 2.0").
-b6 causes the dump to be in the Kerberos 5 Beta 6 format
("kdb5_edit load_dump version 3.0").
-b7 causes the dump to be in the Kerberos 5 Beta 7 format
("kdb5_util load_dump version 4"). This was the dump
format produced on releases prior to 1.2.2.
-ov causes the dump to be in ovsec_adm_export format.
-verbose
causes the name of each principal and policy to be
printed as it is dumped.
-mkey_convert
prompts for a new master key. This new master key will
be used to re-encrypt the key data in the dumpfile. The
key data in the database will not be changed.
-new_mkey_file mkey_file
the filename of a stash file. The master key in this
stash file will be used to re-encrypt the key data in the
dumpfile. The key data in the database will not be
changed.
-rev dumps in reverse order. This may recover principals that
do not dump normally, in cases where database corruption
has occured.
-recurse
causes the dump to walk the database recursively (btree
only). This may recover principals that do not dump nor-
mally, in cases where database corruption has occured.
In cases of such corruption, this option will probably
retrieve more principals than the -rev option will.
load [-old] [-b6] [-b7] [-ov] [-hash]
[-verbose] [-update] filename dbname [admin_dbname]
Loads a database dump from the named file into the named data-
base. Unless the -old or -b6 option is given, the format of the
dump file is detected automatically and handled as appropriate.
Unless the -update option is given, load creates a new database
-hash requires the database to be stored as a hash. If this
option is not specified, the database will be stored as a
btree. This option is not recommended, as databases
stored in hash format are known to corrupt data and lose
principals.
-verbose
causes the name of each principal and policy to be
printed as it is dumped.
-update
records from the dump file are added to or updated in the
existing database; otherwise, a new database is created
containing only what is in the dump file and the old one
destroyed upon successful completion.
dbname is required and overrides the value specified on the com-
mand line or the default.
admin_dbname
is optional and is derived from dbname if not specified.
dump_v4 [-S] [filename]
Dumps the current database into the Kerberos 4 database dump
format. The -S option specifies the short lifetime algorithm.
load_v4 [-T] [-v] [-h] [-S]
[-t] [-n] [-K] [-s stashfile] inputfile
Loads a Kerberos 4 database dump file. Options:
-K prompts for the V5 master key instead of using the
stashed version.
-n prompts for the V4 master key, instead of reading from
the stash file.
-s stashfile
gets the V4 master key out of stashfile instead of /.k
-T creates a new krbtgt instead of converting the V4 one.
The V5 server will thus not recognize outstanding tick-
ets, so this should be used with caution.
-v lists each principal as it is converted or ignored.
-t uses a temporary database, then moves that into place,
instead of adding the keys to the current database.
-S Uses the short lifetime algorithm for conversion.
-h Stores the database as a hash instead of a btree. This
the value into both fields.
ark Adds a random key.
SEE ALSO
kadmin(8)
KDB5_UTIL(8)
Man(1) output converted with
man2html