[-M first_ttl] [-m max_ttl] [-P proto] [-p port] [-q nqueries]
[-s src_addr] [-t tos] [-w waittime] [-z pausemsecs] host
[packetsize]
DESCRIPTION
The Internet is a large and complex aggregation of network hardware, con-
nected together by gateways. Tracking the route one's packets follow (or
finding the miscreant gateway that's discarding your packets) can be dif-
ficult. Traceroute utilizes the IP protocol `time to live' field and
attempts to elicit an ICMP TIME_EXCEEDED response from each gateway along
the path to some host.
The only mandatory parameter is the destination host name or IP number.
The default probe datagram length is 40 bytes, but this may be increased
by specifying a packet size (in bytes) after the destination host name.
Other options are:
-f first_ttl
Set the initial time-to-live used in the first outgoing probe
packet.
-F Set the "don't fragment" bit.
-d Enable socket level debugging.
-g gateway
Specify a loose source route gateway (8 maximum).
-i iface
Specify a network interface to obtain the source IP address for
outgoing probe packets. This is normally only useful on a multi-
homed host. (See the -s flag for another way to do this.)
-I Use ICMP ECHO instead of UDP datagrams. (A synonym for "-P
icmp").
-M first_ttl
Set the initial time-to-live value used in outgoing probe pack-
ets. The default is 1, i.e., start with the first hop.
-m max_ttl
Set the max time-to-live (max number of hops) used in outgoing
probe packets. The default is net.inet.ip.ttl hops (the same
default used for TCP connections).
-n Print hop addresses numerically rather than symbolically and
numerically (saves a nameserver address-to-name lookup for each
gateway found on the path).
-P proto
Send packets of specified IP protocol. The currently supported
unused port range.
-q nqueries
Set the number of probes per ``ttl'' to nqueries (default is
three probes).
-r Bypass the normal routing tables and send directly to a host on
an attached network. If the host is not on a directly-attached
network, an error is returned. This option can be used to ping a
local host through an interface that has no route through it
(e.g., after the interface was dropped by routed(8)).
-s src_addr
Use the following IP address (which must be given as an IP num-
ber, not a hostname) as the source address in outgoing probe
packets. On hosts with more than one IP address, this option can
be used to force the source address to be something other than
the IP address of the interface the probe packet is sent on. If
the IP address is not one of this machine's interface addresses,
an error is returned and nothing is sent. (See the -i flag for
another way to do this.)
-S Print a summary of how many probes were not answered for each
hop.
-t tos Set the type-of-service in probe packets to the following value
(default zero). The value must be a decimal integer in the range
0 to 255. This option can be used to see if different types-of-
service result in different paths. (If you are not running a
4.4BSD or later system, this may be academic since the normal
network services like telnet and ftp don't let you control the
TOS). Not all values of TOS are legal or meaningful - see the IP
spec for definitions. Useful values are probably `-t 16' (low
delay) and `-t 8' (high throughput).
-v Verbose output. Received ICMP packets other than TIME_EXCEEDED
and UNREACHABLEs are listed.
-w Set the time (in seconds) to wait for a response to a probe
(default 5 sec.).
-x Toggle IP checksums. Normally, this prevents traceroute from cal-
culating IP checksums. In some cases, the operating system can
overwrite parts of the outgoing packet but not recalculate the
checksum (so in some cases the default is to not calculate check-
sums and using -x causes them to be calculated). Note that check-
sums are usually required for the last hop when using ICMP ECHO
probes ( -I ). So they are always calculated when using ICMP.
-z pausemsecs
Set the time (in milliseconds) to pause between probes (default
0). Some systems such as Solaris and routers such as Ciscos rate
a "*" is printed for that probe.
We don't want the destination host to process the UDP probe packets so
the destination port is set to an unlikely value (if some clod on the
destination is using that value, it can be changed with the -p flag).
A sample use and output might be:
[yak 71]% traceroute nis.nsf.net.
traceroute to nis.nsf.net (35.1.1.48), 64 hops max, 38 byte packet
1 helios.ee.lbl.gov (128.3.112.1) 19 ms 19 ms 0 ms
2 lilac-dmc.Berkeley.EDU (128.32.216.1) 39 ms 39 ms 19 ms
3 lilac-dmc.Berkeley.EDU (128.32.216.1) 39 ms 39 ms 19 ms
4 ccngw-ner-cc.Berkeley.EDU (128.32.136.23) 39 ms 40 ms 39 ms
5 ccn-nerif22.Berkeley.EDU (128.32.168.22) 39 ms 39 ms 39 ms
6 128.32.197.4 (128.32.197.4) 40 ms 59 ms 59 ms
7 131.119.2.5 (131.119.2.5) 59 ms 59 ms 59 ms
8 129.140.70.13 (129.140.70.13) 99 ms 99 ms 80 ms
9 129.140.71.6 (129.140.71.6) 139 ms 239 ms 319 ms
10 129.140.81.7 (129.140.81.7) 220 ms 199 ms 199 ms
11 nic.merit.edu (35.1.1.48) 239 ms 239 ms 239 ms
Note that lines 2 & 3 are the same. This is due to a buggy kernel on the
2nd hop system - lbl-csam.arpa - that forwards packets with a zero ttl (a
bug in the distributed version of 4.3 BSD). Note that you have to guess
what path the packets are taking cross-country since the NSFNet (129.140)
doesn't supply address-to-name translations for its NSSes.
A more interesting example is:
[yak 72]% traceroute allspice.lcs.mit.edu.
traceroute to allspice.lcs.mit.edu (18.26.0.115), 64 hops max
1 helios.ee.lbl.gov (128.3.112.1) 0 ms 0 ms 0 ms
2 lilac-dmc.Berkeley.EDU (128.32.216.1) 19 ms 19 ms 19 ms
3 lilac-dmc.Berkeley.EDU (128.32.216.1) 39 ms 19 ms 19 ms
4 ccngw-ner-cc.Berkeley.EDU (128.32.136.23) 19 ms 39 ms 39 ms
5 ccn-nerif22.Berkeley.EDU (128.32.168.22) 20 ms 39 ms 39 ms
6 128.32.197.4 (128.32.197.4) 59 ms 119 ms 39 ms
7 131.119.2.5 (131.119.2.5) 59 ms 59 ms 39 ms
8 129.140.70.13 (129.140.70.13) 80 ms 79 ms 99 ms
9 129.140.71.6 (129.140.71.6) 139 ms 139 ms 159 ms
10 129.140.81.7 (129.140.81.7) 199 ms 180 ms 300 ms
11 129.140.72.17 (129.140.72.17) 300 ms 239 ms 239 ms
12 * * *
13 128.121.54.72 (128.121.54.72) 259 ms 499 ms 279 ms
14 * * *
15 * * *
16 * * *
17 * * *
18 ALLSPICE.LCS.MIT.EDU (18.26.0.115) 339 ms 279 ms 279 ms
Note that the gateways 12, 14, 15, 16 & 17 hops away either don't send
4 ccngw-ner-cc.Berkeley.EDU (128.32.136.23) 39 ms 40 ms 19 ms
5 ccn-nerif35.Berkeley.EDU (128.32.168.35) 39 ms 39 ms 39 ms
6 csgw.Berkeley.EDU (128.32.133.254) 39 ms 59 ms 39 ms
7 * * *
8 * * *
9 * * *
10 * * *
11 * * *
12 * * *
13 rip.Berkeley.EDU (128.32.131.22) 59 ms ! 39 ms ! 39 ms !
Notice that there are 12 "gateways" (13 is the final destination) and
exactly the last half of them are "missing". What's really happening is
that rip (a Sun-3 running Sun OS3.5) is using the ttl from our arriving
datagram as the ttl in its ICMP reply. So, the reply will time out on
the return path (with no notice sent to anyone since ICMP's aren't sent
for ICMP's) until we probe with a ttl that's at least twice the path
length. I.e., rip is really only 7 hops away. A reply that returns with
a ttl of 1 is a clue this problem exists. Traceroute prints a "!" after
the time if the ttl is <= 1. Since vendors ship a lot of obsolete (DEC's
Ultrix, Sun 3.x) or non-standard (HPUX) software, expect to see this
problem frequently and/or take care picking the target host of your
probes.
Other possible annotations after the time are !H, !N, or !P (host, net-
work or protocol unreachable), !S (source route failed), !F (fragmenta-
tion needed - the RFC1191 Path MTU Discovery value is displayed), !X
(communication administratively prohibited), !V (host precedence viola-
tion), !C (precedence cutoff in effect), or !<num> (ICMP unreachable code
<num>). These are defined by RFC1812 (which supersedes RFC1716). If
almost all the probes result in some kind of unreachable, traceroute will
give up and exit.
This program is intended for use in network testing, measurement and man-
agement. It should be used primarily for manual fault isolation.
Because of the load it could impose on the network, it is unwise to use
traceroute during normal operations or from automated scripts.
AUTHOR
Implemented by Van Jacobson from a suggestion by Steve Deering. Debugged
by a cast of thousands with particularly cogent suggestions or fixes from
C. Philip Wood, Tim Seaver and Ken Adelman.
SEE ALSO
netstat(1), ping(8)
BUGS
When using protocols other than UDP, functionality is reduced. In par-
ticular, the last packet will often appear to be lost, because even
though it reaches the destination host, there's no way to know that
because no ICMP message is sent back. In the TCP case, traceroute should
listen for a RST from the destination host (or an intermediate router
Man(1) output converted with
man2html