FreeBSD source tree. It is also a guide for preferred userland code
style.
/*
* Style guide for FreeBSD. Based on the CSRG's KNF (Kernel Normal Form).
*
* @(#)style 1.14 (Berkeley) 4/28/95
* $FreeBSD: src/share/man/man9/style.9,v 1.32.2.16 2001/12/17 11:30:19 ru Exp $
*/
/*
* VERY important single-line comments look like this.
*/
/* Most single-line comments look like this. */
/*
* Multi-line comments look like this. Make them real sentences. Fill
* them so they look like real paragraphs.
*/
After any copyright header, there is a blank line, and the rcsid for
source files. Version control system ID tags should only exist once in a
file (unlike this one). Non-C/C++ source files follow the example above,
while C/C++ source files follow the one below. All VCS (version control
system) revision identification from files obtained from elsewhere should
be maintained, including, where applicable, multiple IDs showing a file's
history. In general, keep the IDs intact, including any `$'s. There is
no reason to add "From" in front of foreign VCS IDs. Most non-FreeBSD
VCS IDs should be indented by a tab if in a comment.
#include <sys/cdefs.h>
__RCSID("@(#)style 1.14 (Berkeley) 4/28/95");
__FBSDID("$FreeBSD: src/share/man/man9/style.9,v 1.32.2.16 2001/12/17 11:30:19 ru Exp $");
Leave another blank line before the header files.
Kernel include files (i.e. sys/*.h) come first; normally, include
<sys/types.h> OR <sys/param.h>, but not both. <sys/types.h> includes
<sys/cdefs.h>, and it is okay to depend on that.
#include <sys/types.h> /* Non-local includes in angle brackets. */
For a network program, put the network include files next.
#include <net/if.h>
#include <net/if_dl.h>
#include <net/route.h>
#include <netinet/in.h>
#include <protocols/rwhod.h>
Leave a blank line before the next group, the /usr include files, which
for implementing application interfaces.
The names of ``unsafe'' macros (ones that have side effects), and the
names of macros for manifest constants, are all in uppercase. The expan-
sions of expression-like macros are either a single token or have outer
parentheses. Put a single tab character between the #define and the
macro name. If a macro is an inline expansion of a function, the func-
tion name is all in lowercase and the macro has the same name all in
uppercase. If a macro needs more than a single line, use braces (`{' and
`}'). Right-justify the backslashes; it makes it easier to read. If the
macro encapsulates a compound statement, enclose it in a do loop, so that
it can safely be used in if statements. Any final statement-terminating
semicolon should be supplied by the macro invocation rather than the
macro, to make parsing easier for pretty-printers and editors.
#define MACRO(x, y) do { \
variable = (x) + (y); \
(y) += 2; \
} while(0)
Enumeration values are all uppercase.
enum enumtype { ONE, TWO } et;
When declaring variables in structures, declare them sorted by use, then
by size, and then in alphabetical order. The first category normally
does not apply, but there are exceptions. Each one gets its own line.
Try to make the structure readable by aligning the member names using
either one or two tabs depending upon your judgment. You should use one
tab if it suffices to align most of the member names. Names following
extremely long types should be separated by a single space.
Major structures should be declared at the top of the file in which they
are used, or in separate header files if they are used in multiple source
files. Use of the structures should be by separate declarations and
should be extern if they are declared in a header file.
struct foo {
struct foo *next; /* List of active foo. */
struct mumble amumble; /* Comment for mumble. */
int bar; /* Try to align the comments. */
struct verylongtypename *baz; /* Won't fit in 2 tabs. */
};
struct foo *foohead; /* Head of global foo list. */
Use queue(3) macros rather than rolling your own lists, whenever possi-
ble. Thus, the previous example would be better written:
#include <sys/queue.h>
struct foo {
LIST_ENTRY(foo) link; /* Use queue macros for foo lists. */
int level;
} BAR;
All functions are prototyped somewhere.
Function prototypes for private functions (i.e. functions not used else-
where) go at the top of the first source module. Functions local to one
source module should be declared static.
Functions used from other parts of the kernel are prototyped in the rele-
vant include file.
Functions that are used locally in more than one module go into a sepa-
rate header file, e.g. "extern.h".
Only use the __P macro from the include file <sys/cdefs.h> if the source
file in general is (to be) compilable with a K&R Old Testament compiler.
Use of the __P macro in new code is discouraged, although modifications
to existing files should be consistent with that file's conventions.
In general code can be considered ``new code'' when it makes up about 50%
or more of the file(s) involved. This is enough to break precedents in
the existing code and use the current style guidelines.
The kernel has a name associated with parameter types, e.g., in the ker-
nel use:
void function(int fd);
In header files visible to userland applications, prototypes that are
visible must use either ``protected'' names (ones beginning with an
underscore) or no names with the types. It is preferable to use pro-
tected names. E.g., use:
void function(int);
or:
void function(int _fd);
Prototypes may have an extra space after a tab to enable function names
to line up:
static char *function(int _arg, const char *_arg2, struct foo *_arg3,
struct bar *_arg4);
static void usage(void);
/*
* All major routines should have a comment briefly describing what
* they do. The comment before the "main" routine should describe
* what the program does.
*/
while ((ch = getopt(argc, argv, "abn:")) != -1)
switch (ch) { /* Indent the switch. */
case 'a': /* Don't indent the case. */
aflag = 1;
/* FALLTHROUGH */
case 'b':
bflag = 1;
break;
case 'n':
num = strtol(optarg, &ep, 10);
if (num <= 0 || *ep != '\0') {
warnx("illegal number, -n argument -- %s",
optarg);
usage();
}
break;
case '?':
default:
usage();
/* NOTREACHED */
}
argc -= optind;
argv += optind;
Space after keywords (if, while, for, return, switch). No braces are
used for control statements with zero or only a single statement unless
that statement is more than a single line in which case they are permit-
ted. Forever loops are done with for's, not while's.
for (p = buf; *p != '\0'; ++p)
; /* nothing */
for (;;)
stmt;
for (;;) {
z = a + really + long + statement + that + needs +
two lines + gets + indented + four + spaces +
on + the + second + and + subsequent + lines;
}
for (;;) {
if (cond)
stmt;
}
if (val != NULL)
val = realloc(val, newsize);
Parts of a for loop may be left empty. Do not put declarations inside
blocks unless the routine is unusually complicated.
for (; cnt < 15; cnt++) {
stmt1;
stmt2;
produce and do not use spaces in front of tabs.
Closing and opening braces go on the same line as the else. Braces that
are not necessary may be left out.
if (test)
stmt;
else if (bar) {
stmt;
stmt;
} else
stmt;
No spaces after function names. Commas have a space after them. No spa-
ces after `(' or `[' or preceding `]' or `)' characters.
error = function(a1, a2);
if (error != 0)
exit(error);
Unary operators do not require spaces, binary operators do. Do not use
parentheses unless they are required for precedence or unless the state-
ment is confusing without them. Remember that other people may confuse
easier than you. Do YOU understand the following?
a = b->c[0] + ~d == (e || f) || g && h ? i : j >> 1;
k = !(l & FLAGS);
Exits should be 0 on success, or according to the predefined values in
sysexits(3).
exit(EX_OK); /*
* Avoid obvious comments such as
* "Exit 0 on success."
*/
}
The function type should be on a line by itself preceding the function.
static char *
function(int a1, int a2, float fl, int a4)
{
When declaring variables in functions declare them sorted by size, then
in alphabetical order; multiple ones per line are okay. If a line over-
flows reuse the type keyword.
Be careful to not obfuscate the code by initializing variables in the
declarations. Use this feature only thoughtfully. DO NOT use function
calls in initializers.
struct foo one, *two;
NULL is the preferred null pointer constant. Use NULL instead of (type
*)0 or (type *)NULL in contexts where the compiler knows the type, e.g.,
in assignments. Use (type *)NULL in other contexts, in particular for
all function args. (Casting is essential for variadic args and is neces-
sary for other args if the function prototype might not be in scope.)
Test pointers against NULL, e.g., use:
(p = f()) == NULL
not:
!(p = f())
Do not use ! for tests unless it is a boolean, e.g. use
if (*p == '\0')
not
if (!*p)
Routines returning void * should not have their return values cast to any
pointer type.
Use err(3) or warn(3), do not roll your own.
if ((four = malloc(sizeof(struct foo))) == NULL)
err(1, (char *)NULL);
if ((six = (int *)overflow()) == NULL)
errx(1, "number overflowed");
return (eight);
}
Old-style function declarations look like this:
static char *
function(a1, a2, fl, a4)
int a1, a2; /* Declare ints, too, don't default them. */
float fl; /* Beware double vs. float prototype differences. */
int a4; /* List in order declared. */
{
Use ANSI function declarations unless you explicitly need K&R compatibil-
ity. Long parameter lists are wrapped with a normal four space indent.
Variable numbers of arguments should look like this.
#include <stdarg.h>
void
vaf(const char *fmt, ...)
{
and usually cleaner, not to mention avoiding stupid bugs.
Usage statements should look like the manual pages SYNOPSIS. The usage
statement should be structured in the following order:
1. Options without operands come first, in alphabetical order, inside a
single set of brackets (`[' and `]').
2. Options with operands come next, also in alphabetical order, with
each option and its argument inside its own pair of brackets.
3. Required arguments (if any) are next, listed in the order they
should be specified on the command line.
4. Finally, any optional arguments should be listed, listed in the
order they should be specified, and all inside brackets.
A bar (`|') separates ``either-or'' options/arguments, and multiple
options/arguments which are specified together are placed in a single set
of brackets.
"usage: f [-aDde] [-b b_arg] [-m m_arg] req1 req2 [opt1 [opt2]]\n"
"usage: f [-a | -b] [-c [-dEe] [-n number]]\n"
(void)fprintf(stderr, "usage: f [-ab]\n");
exit(EX_USAGE);
}
Note that the manual page options description should list the options in
pure alphabetical order. That is, without regard to whether an option
takes arguments or not. The alphabetical ordering should take into
account the case ordering shown above.
New core kernel code should be reasonably compliant with the style
guides. The guidelines for third-party maintained modules and device
drivers are more relaxed but at a minimum should be internally consistent
with their style.
Stylistic changes (including whitespace changes) are hard on the source
repository and are to be avoided without good reason. Code that is
approximately FreeBSD KNF style compliant in the repository must not
diverge from compliance.
Whenever possible, code should be run through a code checker (e.g.,
lint(1) or gcc -Wall) and produce minimal warnings.
SEE ALSO
indent(1), lint(1), err(3), sysexits(3), warn(3)
HISTORY
This man page is largely based on the src/admin/style/style file from the
4.4BSD-Lite2 release, with occasional updates to reflect the current
Man(1) output converted with
man2html